Climate
Devices that control heating, cooling, humidity, and comfort systems.
Devices
Browse device categories, then drill into focused results.
Covers
Devices that open/close or adjust coverings like blinds, shades, garage doors, and gates.
Energy & Storage
Devices for energy production, storage, and load management.
Lighting
Devices that produce light or control brightness, color, or effects.
Media
Devices used for audio/video playback and home media control.
Network
Explore network options and related results.
Security
Devices that protect the home, control access, and provide alarm functions.
Sensors
Devices that measure conditions or detect state changes (motion, open/closed, temperature, air quality, and more).
Switches & Plugs
On/off control for outlets, relays, and simple circuits.
UI & Interaction
Human interface devices used to control or view automation state.
Updates & Maintenance
Firmware/software update tracking and device maintenance controls.
Video & Cameras
Cameras, doorbells, and recording systems used for video monitoring.
Water Control
Devices that control water flow, irrigation, and shutoff.
-
Motion Detection
Description Motion detection is a key part of security, but is also used extensively to control real time automations like light and presence detection automations.…
-
Motion Sensor Light Switch
Description This dual purpose vacancy and occupancy wall switch sensor provides management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy…
-
Smoke Detector and Alarm Trigger
Description Integrated In-home smoke detectors with Home Assistant. Sends smoke alarm conditions to Home Assistant and allows for manual triggering of smoke alarm. Overview My…
-
Plant Monitoring
Description Plant Monitoring device overview. Overview My Implementation VegTrug Soil Tester, Smart Plant Monitor Songhe Capacitive Soil Moisture Sensor Module UNUSED Gikfun DC 3V 5V…
-
Plugs and Switches (Local Tasmota or Shelly Firmware)
Description Flashing Tasmota Firmware on devices allows the device to communicate with Home Assistant on the local network promoting security, privacy, and reliability. There is…
-
Power Strip
Description Power strip used in office to control audio, monitors, laptop peripherals, and USB powered devices. Integrated with Home Assistant using the Tuya integration. Equipped…
-
Raspiaudio Muse Prototype
Description Project References: Overview My Implementation Raspiaudio Muse Proto 1x3W mono output via terminal screws 1 3W on-board speaker 1 Micro USB charging port with…
-
Magic Home | RGB MagicHome w PIR
Description Magic Home RGB controller with PIR combines a Wi-Fi LED controller with motion-triggered lighting. It is commonly managed by the Magic Home app and…
-
Magic Home | White MagicHome w PIR
Description Magic Home white controller with PIR is a Wi-Fi LED controller for single-color or tunable-white strips, with motion-triggered lighting. It can be integrated using…
-
LC-ESP | LC-ESP01-2R-5V
LC-ESP01-2R-5V is a dual-relay board built around an ESP-01 Wi-Fi module. It is commonly used for DIY relay control and can be flashed with ESPHome…
-
In-Wall Smart Switches
GE/Jasco Z-Wave Plus in-wall smart switches provide reliable local control of lighting and connected loads with optional motion sensing capabilities. These switches replace…
-
Door and Window Sensors
Description These reed sensors are used to detect if a door or window is open or closed. Overview My Implementation These reed sensors are used…
-
GE/Enbrighten | 26931 / ZW4006
GE Enbrighten ZW4006 (model 26931) is a Z-Wave in-wall paddle switch for controlling lighting circuits. It pairs with Z-Wave hubs and can be integrated into…
-
ESPresense (esp32) | ESP32-D0WDQ6-V3
Description ESPresense is a Bluetooth presence system built on ESP32 hardware. It uses ESP32 boards (such as ESP32-D0WDQ6-V3) to detect BLE beacons and report room-level…
-
Ford Motor Company | 2019 Edge
Description The 2019 Ford Edge is a midsize SUV with infotainment and connected vehicle features via FordPass. Home Assistant integration is typically limited to third-party…
-
Dual High-Power MOSFET Trigger Switch Module
Description The board is of high power MOS trigger switch driver module adopts double MOS parallel active output to show lower internal resistance, greater electric…
-
Energy Monitoring
Description The Vue Energy Monitor tracks energy use in real time for each specific circuit 24/7. This provides insight for exactly how much energy you're…
-
Espressif | nodemcu-32s
Description NodeMCU-32S is an ESP32 development board commonly used for Wi-Fi and BLE automation projects. It is well supported by ESPHome for Home Assistant. Overview…
-
Espressif | nodemcuv2
Description NodeMCU v2 is an ESP8266 development board widely used for DIY Wi-Fi automation projects. It is well supported by ESPHome for Home Assistant. Overview…
-
Automatic Standby Gas Generator
Description Specifications Overview My Implementation Specifications Volts 120/240 1 phase 60 Hz 200 Amps Honeywell Generac 20KW/999 HNYWL+200A SE T/S AL Model: G0070632 Service Rated…