Device Category: Air Quality
Measures CO2, VOC, particulate matter (PM2.5/PM10), and air health indicators.
-
Plugs and Switches (Local Tasmota or Shelly Firmware)
Description Flashing Tasmota Firmware on devices allows the device to communicate with Home Assistant on the local network promoting security, privacy, and reliability. There is…
-
In-Wall Smart Switches
GE/Jasco Z-Wave Plus in-wall smart switches provide reliable local control of lighting and connected loads with optional motion sensing capabilities. These switches replace…
-
Microsoft Corporation | Surface Pro
Description Microsoft Surface Pro is a Windows 2-in-1 tablet designed for productivity and touch-first workflows. It can run the Home Assistant Companion App for dashboards…
-
Magic Home | RGB MagicHome w PIR
Description Magic Home RGB controller with PIR combines a Wi-Fi LED controller with motion-triggered lighting. It is commonly managed by the Magic Home app and…
-
Magic Home | White MagicHome w PIR
Description Magic Home white controller with PIR is a Wi-Fi LED controller for single-color or tunable-white strips, with motion-triggered lighting. It can be integrated using…
-
LC-ESP | LC-ESP01-2R-5V
LC-ESP01-2R-5V is a dual-relay board built around an ESP-01 Wi-Fi module. It is commonly used for DIY relay control and can be flashed with ESPHome…
-
Cloud Connected Light Switch
Description This cloud-connected in-wall switch has an integration with Home Assistant and has it's own mobile application called Kasa. Works great, but it is not…
-
Door and Window Sensors
Description These reed sensors are used to detect if a door or window is open or closed. Overview My Implementation These reed sensors are used…
-
GE/Enbrighten | 26931 / ZW4006
GE Enbrighten ZW4006 (model 26931) is a Z-Wave in-wall paddle switch for controlling lighting circuits. It pairs with Z-Wave hubs and can be integrated into…
-
ESPresense (esp32) | ESP32-D0WDQ6-V3
Description ESPresense is a Bluetooth presence system built on ESP32 hardware. It uses ESP32 boards (such as ESP32-D0WDQ6-V3) to detect BLE beacons and report room-level…
-
Ford Motor Company | 2019 Edge
Description The 2019 Ford Edge is a midsize SUV with infotainment and connected vehicle features via FordPass. Home Assistant integration is typically limited to third-party…
-
Dual High-Power MOSFET Trigger Switch Module
Description The board is of high power MOS trigger switch driver module adopts double MOS parallel active output to show lower internal resistance, greater electric…
-
Energy Monitoring
Description The Vue Energy Monitor tracks energy use in real time for each specific circuit 24/7. This provides insight for exactly how much energy you're…
-
Espressif | nodemcu-32s
Description NodeMCU-32S is an ESP32 development board commonly used for Wi-Fi and BLE automation projects. It is well supported by ESPHome for Home Assistant. Overview…
-
Espressif | nodemcuv2
Description NodeMCU v2 is an ESP8266 development board widely used for DIY Wi-Fi automation projects. It is well supported by ESPHome for Home Assistant. Overview…
-
Gas Controller
Description Planned project to automatically start the gas fire table. 300-10000PPM MP-4 combustible Gas Sensor Methane, natural gas, biogas Sensor For Detection Flammable Gas Leak…
-
Gosund | Gosund WP3
Description Gosund|Gosund WP3 device overview. Overview My Implementation I haven't deployed Gosund|Gosund WP3 yet; evaluating integration options and placement. Device Score Summary Category Score Rationale…
-
Sonoff Smart Switches
Sonoff smart switches are WiFi-enabled relay modules that retrofit existing electrical fixtures with smart control capabilities while preserving manual switch operation. The…
-
Emporia | VUE002
Emporia VUE002 (Vue Gen 2) is a whole-home energy monitor that measures mains usage and up to 16 branch circuits using CT clamps. It connects…
-
Broadlink | RM4C mini
Description BroadLink RM4C mini is a compact IR blaster that lets you control IR devices like TVs, AV receivers, and air conditioners from your phone…