Device Category: Air Quality
Measures CO2, VOC, particulate matter (PM2.5/PM10), and air health indicators.
-
Printer
Description 5-in-1 with Wi-Fi®: Print / Copy / Scan / Fax / Photo office printer. Integration with Home Assistant. Overview My Implementation Epson Artisan 835…
-
Raspberry Pi
This is currently a computer for experimentation and is a network speed appliance. This device is targeted as a hub in the outdoor kitchen to…
-
Roborock | roborock.vacuum.a38
Roborock Q7 Max is a robot vacuum and mop with LiDAR-based navigation. It integrates with Home Assistant through the Roborock integration for status and control.
-
Robotic Cleaning
Description Roborock Q7 Max+ combines a wide range of effective robot vacuum technologies proven in generation after generation of Roborock vacuum. It delivers uncompromising vacuuming…
-
Network Video Recorder (NVR) and Cameras
Description Surveillance systems offer a way to combine all Reolink products into a connected, united, and smart security solution with Home Assistant. Camera provide remote…
-
Reolink | CX810
The Reolink CX810 is a versatile security camera that enhances home automation with high-definition video, smart detection, and easy integration into systems like Home Assistant.
-
Reolink | E1 Outdoor SE PoE
Reolink E1 Outdoor SE PoE is an outdoor IP camera designed for continuous power and data over Ethernet. It is built for weather exposure and…
-
Reolink | RLC-1224A
Reolink|RLC-1224A device overview.
-
Reolink | RLC-410-5MP
Description Reolink RLC-410 is a PoE bullet camera focused on reliable outdoor surveillance with local recording options. It integrates with Reolink NVRs or Home Assistant…
-
Plugs and Switches (Local Tasmota or Shelly Firmware)
Description Flashing Tasmota Firmware on devices allows the device to communicate with Home Assistant on the local network promoting security, privacy, and reliability. There is…
-
Reolink | RLC-420-5MP
Description Reolink RLC-420 is a PoE turret-style camera designed for outdoor surveillance. It provides local control options and integrates with Home Assistant. Overview My Implementation…
-
In-Wall Smart Switches
GE/Jasco Z-Wave Plus in-wall smart switches provide reliable local control of lighting and connected loads with optional motion sensing capabilities. These switches replace…
-
LC-ESP | LC-ESP01-2R-5V
LC-ESP01-2R-5V is a dual-relay board built around an ESP-01 Wi-Fi module. It is commonly used for DIY relay control and can be flashed with ESPHome…
-
Espressif | esp01_1m
Description ESP-01 is a compact ESP8266 module often used for simple Wi-Fi automation projects. It is commonly flashed with ESPHome or AT firmware for basic…
-
Espressif | esp8285
Description ESP8285 is an ESP8266-based SoC with embedded flash, used in compact Wi-Fi modules. It is a popular choice for low-cost smart devices and DIY…
-
Cloud Connected Light Switch
Description This cloud-connected in-wall switch has an integration with Home Assistant and has it's own mobile application called Kasa. Works great, but it is not…
-
Espressif | mhetesp32minikit
Description MH-ET LIVE ESP32 MiniKit is a compact ESP32 development board used for Wi-Fi and Bluetooth projects. It is commonly used with ESPHome for Home…
-
GE/Enbrighten | 26931 / ZW4006
GE Enbrighten ZW4006 (model 26931) is a Z-Wave in-wall paddle switch for controlling lighting circuits. It pairs with Z-Wave hubs and can be integrated into…
-
Dual High-Power MOSFET Trigger Switch Module
Description The board is of high power MOS trigger switch driver module adopts double MOS parallel active output to show lower internal resistance, greater electric…
-
Espressif | nodemcu-32s
Description NodeMCU-32S is an ESP32 development board commonly used for Wi-Fi and BLE automation projects. It is well supported by ESPHome for Home Assistant. Overview…